| DC V |
600.0mV/6.000/60.00/600.0/600V
(Input Impedance: 10MΩ, 100MΩ only 600mV)
|±0.5%±2dgt (600.0mV/6.000/60.00/600.0V)
|±0.8%±3dgt (600V) |
| AC V |
6.000/60.00/600.0/600V
(Input Impedance: 10MΩ)
|±1.0%±3dgt (6.000/60.00/600.0V)
|±1.5%±3dgt (600V) |
| DC A |
600/6000µA/60/600mA/6/10A
|±1.2%±3dgt (600/6000µA/60/600mA)
|±2.0%±5dgt (6/10A) |
| AC A |
600/6000µA/60/600mA/6/10A
|±1.5%±4dgt (600/6000µA/60/600mA)
|±2.2%±5dgt (6/10A) |
| Ω |
600Ω/6/60/600kΩ/6/60MΩ
|±1.0%±2dgt (600Ω/6/60/600kΩ/6MΩ)
|±2.0%±3dgt (60MΩ) |
| Continuity buzzer |
0~600Ω (Buzzer sounds below 100Ω) |
| Diode Check |
2.8V Release Voltage:Approx. 0.4mA Test Current |
| Capacitance |
40/400nF/4/40/400/4000µF |
| Frequency |
10/100/1000Hz/10/100/1000kHz/10MHz |
| DUTY |
0.1~99.9% (Pulse width/Pulse period)
|±2.0%±2dgt (~10kHz) |
| Temperature |
-50~300ºC (-58~572ºF)
(with the use of Temperature probe 8216)
 |
| Note: |
KEW 1011 can measure max. 700ºC
In order to measure over 300ºC, please use a K-type temperature probe available in the market. |
|
| Display |
6040 Counts |
| Withstand Voltage |
AC 3700V / 1min. |
| Applicable standards |
IEC 61010-1 CAT.III 300V Pollution degree 2
IEC 61010-1 CAT.II 600V Pollution degree 2
IEC 61010-031
IEC 61326 |
| Power Source |
R6P (1.5V) × 2 (Auto-power-OFF within 15 minutes) |
| Dimensions |
161(L) × 82(W) × 50(D)mm |
| Weight |
Approx. 280g |
| Accessories |
7066A (Test leads)
8216 (K-type Temperature probe)
0.8A/600V (Ceramic Fuse) × 1built-in
10A/600V (Ceramic Fuse) × 1built-in
R6P × 2Instruction Manual |
Selection Guide
Product Catalogue
Instruction Manual
